Lifting Engine 3"...
#1
Registered
Thread Starter
Join Date: Mar 2002
Location: Lake Winni, NH
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Lifting Engine 3"...
Hey Guys...
Looking to raise my motor 3" to use one of those IMCO extension boxes with the 3" lift. Any ideas? It's either raise the engine, or sell off all of my BlackHawk stuff and go Arneson...
Woodsy
Looking to raise my motor 3" to use one of those IMCO extension boxes with the 3" lift. Any ideas? It's either raise the engine, or sell off all of my BlackHawk stuff and go Arneson...
Woodsy
#2
Official OSO boat whore
Charter Member
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Does IMCO have a raised inner plate? That's the hardest thing to over come. After that you just need some taller motor mount angles.
#3
Registered
Thread Starter
Join Date: Mar 2002
Location: Lake Winni, NH
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Cord,
The inner Transom plate from IMCO has raised pads. I am just not too sure of how to go about the front... then of course there is the whole exhaust issue....
Woodsy
The inner Transom plate from IMCO has raised pads. I am just not too sure of how to go about the front... then of course there is the whole exhaust issue....
Woodsy
#5
Registered
Thread Starter
Join Date: Mar 2002
Location: Lake Winni, NH
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Marty...
Yes, yes & yes...
I have been meaning to call you. I just have been absolutely swamped. Please, go ahead & cash the check. Give me a buzz & we can arrange shipping of the rest of the parts.
Woodsy
Yes, yes & yes...
I have been meaning to call you. I just have been absolutely swamped. Please, go ahead & cash the check. Give me a buzz & we can arrange shipping of the rest of the parts.
Woodsy
Thread
Thread Starter
Forum
Replies
Last Post
Hudson
General Q & A
6
12-12-2002 05:46 PM