502 magnum mpi IAC crossover
#1
Registered
Thread Starter
Join Date: Aug 2014
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
My IAC is intermittently working. Nothing open this weekend that would have one does anyone know of the OAC crosses over to an automotive that I might be able to find at Oreillys? Thanks.
#2
Registered
![Default](/forums/images/icons/icon1.gif)
You need an IAC for a 2001-2003 Ford Windstar with a 3.8 liter.
The Echlin # is CRB 2166509 if you can find a NAPA open tomorrow.
I looked this up based off of a 2000 502 Mag MPI.
The Echlin # is CRB 2166509 if you can find a NAPA open tomorrow.
I looked this up based off of a 2000 502 Mag MPI.
#4
Registered
Thread Starter
Join Date: Aug 2014
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Unfortunately that one doesn't look like mine. Mine is this part number. Does anyone know if this crosses over? Thanks
805224A 1 - MOTOR KIT -IAC
Or a Sierra 18-7632.
Any automotive crossover??
805224A 1 - MOTOR KIT -IAC
Or a Sierra 18-7632.
Any automotive crossover??
Last edited by Mitchfishing; 09-07-2014 at 09:11 AM.
#5
Registered
![Default](/forums/images/icons/icon1.gif)
Ahh, you have a 97 or older 502 mag. You need a NAPA Echlin # CRB 21755.
Common GM IAC from say, a 2000-2005 Chevy Impala with a 3.4 liter if you need to give your parts house a year make and model.
Good luck
Common GM IAC from say, a 2000-2005 Chevy Impala with a 3.4 liter if you need to give your parts house a year make and model.
Good luck
#7
Registered
Thread Starter
Join Date: Aug 2014
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Changes the iac with a Sierra 18-7632.
Unfortunately, I turned the ignition switch to on when the iac was not hooked up, to try and test the voltage. The alarm started beeping twice every ten seconds or so. Will not stop
Replaced and started engine. Still surging. Placed my finger over iac hole, no difference.
Alam still sounding.
Any advice?
Unfortunately, I turned the ignition switch to on when the iac was not hooked up, to try and test the voltage. The alarm started beeping twice every ten seconds or so. Will not stop
Replaced and started engine. Still surging. Placed my finger over iac hole, no difference.
Alam still sounding.
Any advice?