What size is this
#1
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
trying to figure out what size this carb is, I found just a couple #'s list 9022 2888
where do I look for the identifier part #
where do I look for the identifier part #
#4
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Thanks BB
#5
Registered
![Default](/forums/images/icons/icon1.gif)
9022 is a holley 800 as billy boats said. It is the oe for hp500, 500 bulldog 420, and a few others
#6
Registered
![Default](/forums/images/icons/icon1.gif)
Looking for 180 stamped on throttle blades maybe , and then there is a pic down the throat of carb , let's see if you have one of the real good ones . And make sure someone hasn't mix matched some parts .the secondary float bowl tube and red choke thermostat is giving me pause as I eat my pizza
#7
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
172 primary....173 secondary
#8
Registered
![Default](/forums/images/icons/icon1.gif)
Could be a player for a mid level 454 build , I would never kick a 4 corner double pumper to the curb ,unless it was back woods modded for alky .if you got it cheap you won't lose .now you have to pull the bowls and see if you have check balls or rubbers