.937 lifters?
#11
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Are you running a high rpm/high lift cam with heavy spring pressure?
For what it's worth, when we took apart my sterling built 509, it had a 55mm cam with bronze bushed lifter bores but, it had standard BBC .842 lifters. .720 lift solid roller with pretty heavy spring pressure. Maybe a class rule for the supercat program dictated the use of the .842 bore?
I asked the machinist about reaming and honing the bushings for a .903 lifter. I was told that at the relatively mild spring pressure I'll be using with my much milder cam would not justify the move up to the.903.
For what it's worth, when we took apart my sterling built 509, it had a 55mm cam with bronze bushed lifter bores but, it had standard BBC .842 lifters. .720 lift solid roller with pretty heavy spring pressure. Maybe a class rule for the supercat program dictated the use of the .842 bore?
I asked the machinist about reaming and honing the bushings for a .903 lifter. I was told that at the relatively mild spring pressure I'll be using with my much milder cam would not justify the move up to the.903.
#12
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Are you running a high rpm/high lift cam with heavy spring pressure?
For what it's worth, when we took apart my sterling built 509, it had a 55mm cam with bronze bushed lifter bores but, it had standard BBC .842 lifters. .720 lift solid roller with pretty heavy spring pressure. Maybe a class rule for the supercat program dictated the use of the .842 bore?
I asked the machinist about reaming and honing the bushings for a .903 lifter. I was told that at the relatively mild spring pressure I'll be using with my much milder cam would not justify the move up to the.903.
For what it's worth, when we took apart my sterling built 509, it had a 55mm cam with bronze bushed lifter bores but, it had standard BBC .842 lifters. .720 lift solid roller with pretty heavy spring pressure. Maybe a class rule for the supercat program dictated the use of the .842 bore?
I asked the machinist about reaming and honing the bushings for a .903 lifter. I was told that at the relatively mild spring pressure I'll be using with my much milder cam would not justify the move up to the.903.
#13
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Stiffness for sure. Do you have any idea how much a cam twist from front to back once the valves are lashed? The other advantage of the larger cam core is you can have a much more gentle lobe profile. The larger the circle the more progressive the ramp can be your an engineer so you should be able to understand pretty easily...
#14
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
I'm aware of the large wheel and axle and the advantages.
Just thought it was interesting that an engine that was engineered to run at 7800 rpm for extended periods of time with a radical cam and lots of spring pressure ( greater pressure would increase the potential for side loading said lifter) only used a .842 lifter. This engine was built by sterling and maintained by baker and ilmor.
When we pulled the lifters out there was no evidence of galling.
Just thought it was interesting that an engine that was engineered to run at 7800 rpm for extended periods of time with a radical cam and lots of spring pressure ( greater pressure would increase the potential for side loading said lifter) only used a .842 lifter. This engine was built by sterling and maintained by baker and ilmor.
When we pulled the lifters out there was no evidence of galling.
#16
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I have a feeling they are limited to diameter on the lifters. I know the are on cam lift and why in the world would you stick a 55mm cam in a motor and stay with the small lifter unless you were limited by rules.
#17
Registered
![Default](/forums/images/icons/icon1.gif)
black baja,are you going to do this on your boat engine that will not see 6000 rpm?
#18
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
That's what I was thinking. Maybe limited by class rules?
#19
Registered
Thread Starter
#20
Registered
![Default](/forums/images/icons/icon1.gif)
why run .800 lift on a cam in a pleasure boat,im not being a dik,i just am not sure why.