cnc d heads
#41
Registered
![Default](/forums/images/icons/icon1.gif)
Dunno yet waiting on the cam master to come up with something. .030 seems like a bit much lash for a marine deal. Who's cam are you using?
Last edited by liquid asset; 01-16-2015 at 02:10 PM.
#42
Registered
![Default](/forums/images/icons/icon1.gif)
Previous cam was hydraulic .721 .721 280 296 @50 idled at 500rpm in and out of gear with Holley Dominator Carb. Don't think you can get that kind of idle with EFI and long duration cams for all the carb haters...
#43
Registered
#44
Registered
#45
![Default](/forums/images/icons/icon1.gif)
Originally Posted by 14 apache
Psi springs will se how they do CT1542DML Damper 1.580" 1.155" N/A .755" [email protected]" [email protected]" 513 .070" .780" 1.200"
My old cams where 276 284 with .750 after valve lash. these made peek 6700 rpm,
I ran the same cam in my Procharged 598 with BB2Xtra and then Big Dukes, did you run the above mentioned springs with it ?
Psi springs will se how they do CT1542DML Damper 1.580" 1.155" N/A .755" [email protected]" [email protected]" 513 .070" .780" 1.200"
My old cams where 276 284 with .750 after valve lash. these made peek 6700 rpm,
I ran the same cam in my Procharged 598 with BB2Xtra and then Big Dukes, did you run the above mentioned springs with it ?
#47
Registered
![Default](/forums/images/icons/icon1.gif)
Did you know that Bullet does not have any lobes in their master list with more than .020 lash? What's the deal with you cam? Something doesn't sound right...
#50
![Default](/forums/images/icons/icon1.gif)
And I was wrong about the cam, it was a Comp Cam 276/284 @.050 .782 lift.solid roller. Crower 68806 springs with the 2xtra's, 68848 and then Pac 1348 with the Big Duke.
Last edited by GPM; 01-16-2015 at 03:41 PM.