Oil filter...
#21
Banned
I will say in pic 13 - the Fram with carboard end caps and then in the bottom pic - the 3 middle oil filters with cardboard end caps are surely the cheapest junk filters you can buy. I can see that one a mile away. Also uneven of pleat distance counts as a sub par& below oil filter. The same goes for your spin on fuel water sep filters.
Good eye by SB on the pleats being cut because at first I thought some it was oil that was thicken, in the pic it sure made it look that way.
Good eye by SB on the pleats being cut because at first I thought some it was oil that was thicken, in the pic it sure made it look that way.
Last edited by BUP; 03-09-2015 at 11:05 PM.
#23
Registered
brad penn oil is some great stuff, just switching to it myself, how long was it run on this oil/filter ? like said before going to need a filter cutter to really tell much...are you running a oil temp gauge ?
#24
Registered
Join Date: Sep 2012
Location: New Bern, NC
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
#25
Registered
Join Date: Sep 2012
Location: New Bern, NC
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
If he has water in oil wouldn't he be able to see it on the dipstick in the form of a milkshake color. You could always do a S.O.S (spectrum oil analyst) on a oil sample. That is what we do on all of our motors. It will tell you if you have a smaller quantities of water or metals in the oil that you can not see with the necked eye.
#26
Platinum Member
Platinum Member
#28
Banned
Mobil one and K& N oil filters internally are the exact same filters - the exact same - one costs a dollar less. If your are worried about your filter media - look into system one filters.
www.system1filters.com
www.system1filters.com
Last edited by BUP; 03-10-2015 at 01:50 PM.