what kind of boat is this
#91
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Worked on boat yesterday. Took out all the seats and bulk head. Every thing was rotten bad. Took the side vents off and the wood part of the deck there is like sawdust. Both engines locked up. Took a lot of pictures I'll post them this week.
#95
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I'm trying to figure out how to get the floor out. its all one piece and runs up the sides. once we get the cabin door and frame out the way I think I'm gonna cut the floor right under it in the center so I can take it out in two pieces. a left and right. it would prolly break there anyways if we try and take it out in one piece........ of course the frame is caulked in with some tough stuff!!!
![](http://i47.photobucket.com/albums/f193/wideopenford/20161015_173653.jpg)
![](http://i47.photobucket.com/albums/f193/wideopenford/20161105_163105.jpg)
![](http://i47.photobucket.com/albums/f193/wideopenford/20161105_163103.jpg)
the tank is in great shape. dirty on the outside but the inside looks like new.
![](http://i47.photobucket.com/albums/f193/wideopenford/20161105_132642.jpg)
![](http://i47.photobucket.com/albums/f193/wideopenford/20161105_163042.jpg)
![](http://i47.photobucket.com/albums/f193/wideopenford/20161105_163055.jpg)
![](http://i47.photobucket.com/albums/f193/wideopenford/20161105_163111.jpg)
this is a up close of the above picture where you see the glass cracked. I dug this hole with my finger. and look how far foreword we are in the hull![OhhhPOOPOO](/forums/images/smilies/more/ohhhPOOPOO.gif)
![](http://i47.photobucket.com/albums/f193/wideopenford/20161015_173653.jpg)
![](http://i47.photobucket.com/albums/f193/wideopenford/20161105_163105.jpg)
![](http://i47.photobucket.com/albums/f193/wideopenford/20161105_163103.jpg)
the tank is in great shape. dirty on the outside but the inside looks like new.
![](http://i47.photobucket.com/albums/f193/wideopenford/20161105_132642.jpg)
![](http://i47.photobucket.com/albums/f193/wideopenford/20161105_163042.jpg)
![](http://i47.photobucket.com/albums/f193/wideopenford/20161105_163055.jpg)
![](http://i47.photobucket.com/albums/f193/wideopenford/20161105_163111.jpg)
this is a up close of the above picture where you see the glass cracked. I dug this hole with my finger. and look how far foreword we are in the hull
![OhhhPOOPOO](/forums/images/smilies/more/ohhhPOOPOO.gif)
![](http://i47.photobucket.com/albums/f193/wideopenford/20161105_163227.jpg)
#97
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I'm bummed the boat is so rotten because I was hoping I could at least put it in the water on a calm day and see what it will run with them mags. Hate to put a bunch of money in a bad handling hull. Do yall think it's too rotten for a sea trial?
I did get the starboard engine to run. Gotta pull a head off the port and figure out why I got antifreeze in #3 cyl
#99
Registered
![Default](/forums/images/icons/icon1.gif)
That's really to bad, As the outside of the boat seemed to clean up well, If there is this much damage just wait till you get into it. I think you will be parting her out!!!
#100
Registered
![Default](/forums/images/icons/icon1.gif)
What a cool old boat and what a shame the build quality is such that this thing most likely would have rotted out having never been put in the water or sat outside its entire life! Kinda like our '74 Vega. The only car ever built to rust out sitting on the showroom floor!