350 N/A Recipes
#31
Registered
![Default](/forums/images/icons/icon1.gif)
Most end up running either the GM Hot Cam (218/228 112LSA) as HAxby did, or the Comp Cams XM270HR (218/224 112LSA).
Exahsut is usally Stainless MArines (as PAnther did) or the cheaper GLM's with extended (must weld these in) inner pipes.
#32
Geronimo36
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
I found the old dyno sheet. It was actually 429 hp.
With a better intake/EFI I think it would have done a bit better. I was also very limited in tuning upper RPM's because the MEFI 1 base map doesn't go up that high. I forget the RPM level it cut off at but I had to set it and forget it.
With a better intake/EFI I think it would have done a bit better. I was also very limited in tuning upper RPM's because the MEFI 1 base map doesn't go up that high. I forget the RPM level it cut off at but I had to set it and forget it.
Last edited by Panther; 03-15-2016 at 02:28 PM.
#33
Registered
![Default](/forums/images/icons/icon1.gif)
Didn't know you sold it. And yes, I do know you loved that thing. The small performance boats are a nice change of pace.
#34
Registered
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Thread Starter
Join Date: Mar 2016
Location: Stephenville
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
ok, last two questions, should I change out the lifters when I do the cam? And is the stock merc distributor/plug wires/plugs all sufficient?
#35
Geronimo36
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
The merc stuff is all fine! Only change I made to my merc system was an MSD coil.
#36
Geronimo36
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
John Cohen was the one who originally suggested that I put a Blackhawk on it when I owned it. He said the hull worked really well with it.
Yes, I sold it in the fall of 2014, just 6 months after completing the restoration. It was a sale I'm not proud of but I unfortunately had to let it go for personal reasons.
#37
Registered
![Default](/forums/images/icons/icon1.gif)
That's all I do to. Canister style MSD High Vibration coil and a seperate coil wire hold down. NGK V Power plugs (i just like them, lol) for the aftmkt heads (ACdelco for stock heads) Rest factory Merc. Don't mess with what works right ? 6100-6200rpm without missing a beat. LOL.
Better that went vs the the big boat ! But .......still suks obviously.
Yeah, it did and it supposedly handles a lot better and has crazy acceleration!
John Cohen was the one who originally suggested that I put a Blackhawk on it when I owned it. He said the hull worked really well with it.
Yes, I sold it in the fall of 2014, just 6 months after completing the restoration. It was a sale I'm not proud of but I unfortunately had to let it go for personal reasons.
John Cohen was the one who originally suggested that I put a Blackhawk on it when I owned it. He said the hull worked really well with it.
Yes, I sold it in the fall of 2014, just 6 months after completing the restoration. It was a sale I'm not proud of but I unfortunately had to let it go for personal reasons.
#38
Registered
![Default](/forums/images/icons/icon1.gif)
Jeff
#40
Registered
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Join Date: Jan 2007
Location: Sweet Home, North Alabama and Orange Beach
Posts: 794
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
A lot of advantage for the RPM on a typical mild 5.7.
Most end up running either the GM Hot Cam (218/228 112LSA) as HAxby did, or the Comp Cams XM270HR (218/224 112LSA).
Exahsut is usally Stainless MArines (as PAnther did) or the cheaper GLM's with extended (must weld these in) inner pipes.
Most end up running either the GM Hot Cam (218/228 112LSA) as HAxby did, or the Comp Cams XM270HR (218/224 112LSA).
Exahsut is usally Stainless MArines (as PAnther did) or the cheaper GLM's with extended (must weld these in) inner pipes.
LC