some 4150/4500 dyno info
#61
Charter Member#568
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Thanks jonesy. When the engines go back on the dyno they will have full accessories. These runs were just to give me a direction for parts selection. They are going back on for final tuning. Then we will see how much of a difference accessories and marine headers make.
__________________
Straight bottoms and flat decks
Straight bottoms and flat decks
#62
Charter Member#568
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
All my 4150 intake testing was done with a plain open spacer based on my previous dyno experience with this combo. All the 4500 intake spacers were the HVH type based on the builders experience. I would like to try something like I quoted in post # 18 when they go back on, but funds and/ or Steve telling me to get this over with will likely prevent that from happening.
__________________
Straight bottoms and flat decks
Straight bottoms and flat decks