Tinkerer

Anyone have a global file I can look at for a 598 NA running 8.6 compression, AFR 357 CNC heads and solid roller cam.
I am running sequential port injection.

Tinkerer

Ttt

launchpad475

PM Haxby, I bet he has something. There has to be a big NA global file in the base/custom cals that comes standard in the hefi folders that could get you going.

HaxbySpeed

What's your email? I'll send you one right now.

indysupra

Haxby is the man!!!!

Tinkerer

[email protected]

Thanks - I am trying to learn how to set up the global settings for this engine.
I bought the new Holley distributor with the cam sensor and crank sensor built in so that I could run sequential injection.

Thanks again.

HaxbySpeed

Sent. You'll have to change the ignition type, injectors if they're different, firing order, etc. but it's a solid tune that will get you up and running.

Tinkerer

Thanks - I am running 66 PPH injectors ( 111's) and the MSD 6 box. The cam has the 4/7 swap.