500 efi noise re-visited
#31
Registered
Thread Starter
#32
Registered
![Default](/forums/images/icons/icon1.gif)
Isky, Crower, and Teague , amongs others, have gone here. http://johnsonlifters.com/Distributors.aspx
Check out full listing under the map.
Hopefully we get more feedback as time goes on.
#33
Registered
![Default](/forums/images/icons/icon1.gif)
I just put in new Johnson lifters along with a new cam. Lifters were stock spec replacement for the GM lifters and cam is a crane 741. 3/4 turn after zero lash. No issues as of yet. Hope you get this solved sooner than later.
#35
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Thanks. Paying someone to re-do everything. Sweet. The lifter company isn't paying for any labor. Shocker.
#39
Registered
Thread Starter
#40
Registered
![Default](/forums/images/icons/icon1.gif)
My like above is actually I understand and right with you. Been in these situations a couple too many times.
Every year I had wished GM would make a bad azz HR lifter for the BBC's like they do for the sbc. Cherry on top is the GM SBC lifters are cheap.
Every year I had wished GM would make a bad azz HR lifter for the BBC's like they do for the sbc. Cherry on top is the GM SBC lifters are cheap.