500 efi noise re-visited
#61
Registered
![Default](/forums/images/icons/icon1.gif)
ooops. Duplicate.
#62
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Here is an update. Engines were both torn down last week. The morels will be sent back for warranty claim then posted for sale.
For the new build I went with the scorpion scp4014 roller rockers and Johnson 2126bbr lifters. Both just came in today. They are going to the mechanic tonight and he will start setting up geometry over the weekend. Hopefully old push rods work. If not I will be overnighting new ones. Hoping to be on the water next weekend.
For the new build I went with the scorpion scp4014 roller rockers and Johnson 2126bbr lifters. Both just came in today. They are going to the mechanic tonight and he will start setting up geometry over the weekend. Hopefully old push rods work. If not I will be overnighting new ones. Hoping to be on the water next weekend.
#63
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Welp the old push rods didn't work. So the ones I had in there will be for sale shortly. They are Manton 0.120 wall. I'll have to measure length. Ended up ordering new comp cam hi tech push rods 0.135 which I'm told is made by trend.
As an aside anyone use the scorpion scp4014 marine rockers. They are beefy as hell. Just want to make sure they fit under stock valve covers. I'm thinking they should. Merc now uses them in there new blue motors.
Thanks.
As an aside anyone use the scorpion scp4014 marine rockers. They are beefy as hell. Just want to make sure they fit under stock valve covers. I'm thinking they should. Merc now uses them in there new blue motors.
Thanks.
#64
Registered
![Default](/forums/images/icons/icon1.gif)
Interesting good luck
#66
Registered
Thread Starter
#68
Registered
Thread Starter