what transom work is needed to convert TRS to SSMIII drives?
#31
Registered
![Default](/forums/images/icons/icon1.gif)
Tim do you think you would pick up any mph switching to #3 from trs?
#33
Registered
![Default](/forums/images/icons/icon1.gif)
Its very easy to convert from TRS to SSM3...and vice versa. Really the SSM3 has a larger opening, so really not much if any filling in. I converted an SSM3 boat to TRS (all I had laying around at the time). It was minimal work to plug holes again for SSM3.
The SSM3 will move the motor slightly forward (about 2 inches) and you will DEFINITELY gain speed. Have you seen the SSM3 lower compared to a TRS: huge difference, smaller case, nice cone, less resistance etc.
You could also get lucky and be able to raise X dimension without filling too much either.
Ive had 800hp in front of my SSM3s for 300hrs. No issues besides changing oil.
Meanwhile, with TRS I had 415HP and blew a lower within 50 hrs....
Get some and don't look back.
The SSM3 will move the motor slightly forward (about 2 inches) and you will DEFINITELY gain speed. Have you seen the SSM3 lower compared to a TRS: huge difference, smaller case, nice cone, less resistance etc.
You could also get lucky and be able to raise X dimension without filling too much either.
Ive had 800hp in front of my SSM3s for 300hrs. No issues besides changing oil.
Meanwhile, with TRS I had 415HP and blew a lower within 50 hrs....
Get some and don't look back.
#34
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,636
Likes: 0
Received 209 Likes
on
133 Posts
![Default](/forums/images/icons/icon1.gif)
I figured they took a few more HP to spin so didn't look to gain, maybe maybe not, I hope I get the doner boat I am looking at we will see!!
Its very easy to convert from TRS to SSM3...and vice versa. Really the SSM3 has a larger opening, so really not much if any filling in. I converted an SSM3 boat to TRS (all I had laying around at the time). It was minimal work to plug holes again for SSM3.
The SSM3 will move the motor slightly forward (about 2 inches) and you will DEFINITELY gain speed. Have you seen the SSM3 lower compared to a TRS: huge difference, smaller case, nice cone, less resistance etc.
You could also get lucky and be able to raise X dimension without filling too much either.
Ive had 800hp in front of my SSM3s for 300hrs. No issues besides changing oil.
Meanwhile, with TRS I had 415HP and blew a lower within 50 hrs....
Get some and don't look back.
The SSM3 will move the motor slightly forward (about 2 inches) and you will DEFINITELY gain speed. Have you seen the SSM3 lower compared to a TRS: huge difference, smaller case, nice cone, less resistance etc.
You could also get lucky and be able to raise X dimension without filling too much either.
Ive had 800hp in front of my SSM3s for 300hrs. No issues besides changing oil.
Meanwhile, with TRS I had 415HP and blew a lower within 50 hrs....
Get some and don't look back.
#36
Registered
![Default](/forums/images/icons/icon1.gif)
My outer mouth: F*** that - momma didn't raise no quitter!
Lol
#37
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,636
Likes: 0
Received 209 Likes
on
133 Posts
![Default](/forums/images/icons/icon1.gif)
I love the mistress so I wanna keep it. Now would I go spend 15-25,000.00 on parts to convert? No way.... But.... If I can buy a compete boat at a deal, keep conversion parts I need and still break even selling the rest or make $$? Then yes I will convert the boat I love... That's the plan anyway!!
#39
Registered
![Default](/forums/images/icons/icon1.gif)
That is correct. Only thing is the engines move forward a little. If you find a pair of boxes and run drive shafts you don't even need to move the motors... However the parts for the carriers in the boxes are difficult to find. I do have a machinist that can make all the carrier pieces as well as transom assembly hardware. We just completed a speed master transom assembly that we made all new hardware for with more modern hardware. Inconel pins and delrin bushings throughout.
#40
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
How would it work ( meaning perform ) with a 2 up box mounted in the TRS drive location, essentially raising the X two inches