AFR 325 flow sheets.... anyone ever flow these heads?
#232
Charter Member#568
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Disagree, but that's what forums are for, that is like saying a dyno is a waste, in the end, I have flow numbers that were done on the bench my guy uses for ALL his engines, a head guy with 40 years of hand porting heads, and not magazine flow numbers, I am ok with that, bob spec'd cam with none of that... I am willing to accept the results this time
__________________
Straight bottoms and flat decks
Straight bottoms and flat decks
Last edited by bck; 01-09-2017 at 09:32 PM.
#233
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,636
Likes: 0
Received 208 Likes
on
133 Posts
![Default](/forums/images/icons/icon1.gif)
Ok, let me clarify again. The information is useful for your guy to specify cams for your engines which is all you really need. The information is not useful for comparative purposes against out of the box afr flow numbers or against another porters work which is what the rest of us would be interested in. Based on my limited experience with researching my parts I think those are good heads for you. I think the 305s are getting a bit marginal for 6k 700hp 540. I'm sticking with my original prediction that the biggest improvements you'll see will be from intake/ carb/ exhaust
#235
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
#237
Registered
![Default](/forums/images/icons/icon1.gif)
do I dare say,,
page 24.
page 24.
![Big Grin](/forums/images/smilies/biggrin.gif)
#238
Registered
![Default](/forums/images/icons/icon1.gif)
Blowers!!!
I'm pretty certain I will end up with less cam than Tims.
Last edited by getrdunn; 01-09-2017 at 11:04 PM.
#239
Registered
![Default](/forums/images/icons/icon1.gif)
i have a 1150 dominator you can borrow for testing if you want to try it.
#240
Registered
![Default](/forums/images/icons/icon1.gif)
Does BOB M. even post on OSO anymore??? Just curious.
Gitrdunn......Did Jim V do anything to my engines? Seems to have a good following.
Gitrdunn......Did Jim V do anything to my engines? Seems to have a good following.