AFR 325 flow sheets.... anyone ever flow these heads?
#261
Registered
#264
Charter Member#568
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
I understood they weren't yours, I thought you were concerned it was going to happen to yours. How about your seats, were they ok?
__________________
Straight bottoms and flat decks
Straight bottoms and flat decks
#265
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,636
Likes: 0
Received 208 Likes
on
133 Posts
![Default](/forums/images/icons/icon1.gif)
As far as cams go, of course I'm in the spot, I do know that everyone said with more duration there would be no issues, so as far as I am concerned new cams will have around 10 more degrees duration with same lift, therefor I can care less what happened with old cams as we all know what we think it was, I do not agree my cams were ok given what I looked at, but if I get new cams covered then I'm good.
#268
Registered
#269
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,636
Likes: 0
Received 208 Likes
on
133 Posts
![Default](/forums/images/icons/icon1.gif)
Jim v set up heads in fact caught a defect from dart and took care of it and they sent replacement. . That's why I buy bare castings and drop off to head guy. I realize not everyone has that luxury nearby but was still a few couple hour trips when said and done. When It comes to heads that guy is like finding a needle in a hay stack. Beyond normal maint I leave heads to the experts.