AFR 325 flow sheets.... anyone ever flow these heads?
#681
Registered
that is how i used to pick the engine out of my drag boats,8 grade 8 bolts and 4 pipes welded to the flange seems plenty strong to me.
#682
Gold Member
Gold Member
I just run a choker under the intake.
That said, it is amazing what a grade 5 bolt is rated for.
I always worry more about the threads in the intake as apposed to the bolts themselves.
That said, it is amazing what a grade 5 bolt is rated for.
I always worry more about the threads in the intake as apposed to the bolts themselves.
#683
Charter Member#568
Charter Member
I just didn't want all that weight on the header welds. Creating a leak if there was a weak point was my concern.
__________________
Straight bottoms and flat decks
Straight bottoms and flat decks
#690
Platinum Member
Platinum Member
When we got carb we saw secondarys werent square when primarys were, norm says its a common occurrence, could be possibilty why carbs needed different jetting. I never gave it a lot of thought before norm showed me that. The 102 mm tb we tested on my 548 had same issue, once throttle stop was ground on to get throttle blade perfectly square it picked up 10% airflow.