Cam and valvetrain longevity....??? low duration high lift...
#1781
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,636
Likes: 0
Received 209 Likes
on
133 Posts
![Default](/forums/images/icons/icon1.gif)
oil came out of pans clean, I cut open filters at every oil change, no reason to take them apart and add more cost to my 50,000.00 pair of 540's that should have been 25,000....
That's good I'm glad your getting them sent out. I would hope they are able to communicate and come to a conclusion without you having to be a go between guy. I'd also send each company part number of spring used at installed heidth. Short blocks going untouched is completely your choice. I'd be really curious as to what's on drain plugs if anything. Regardless good luck with everything.
![Full Force is offline](/forums/images/statusicon/user_offline.gif)
#1782
Registered
Join Date: May 2015
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I have pretty thick skin and not bothered by stuff like this guys. Won't run me off that easy
. Been doing the forum thing for a long time and knew how this would turn out before I even posted, thus my 1st paragraph on my 1st post.
My opinion on this really doesn't matter. It's an opinion and needs to be checked out to verify. Being in this industry I know the damage forums have on a company and there's NO reason for me to get involved publically past the lifters. You're damn skippy I posted in here to stand up for my product...the information being spouted was blatantly wrong. I felt the need to correct it. No where did I say I found out about this yesterday, as Tim pointed out he's been talking to me about this since the beginning. Anybody who has dealt with our company or myself knows we don't run from problems. We figure it out, make improvements, and offer the solution. Issues will always pop up in this industry, although sometimes costly, but they allow you to rectify a weakness and improve the product. Answering some of those questions would have turned into another round of responses saying I was bashing a competitors product. Which is the last thing I'm trying to do. We both make quality performance lifters. Having options is great and as a consumer you should be happy to have different companies competing to be the "best". That's how we make more reliable horsepower...technological advancements.
The only fact on this particular topic is the lifters did not fail, or even show signs of wear. I've been doing this long enough to gather that information from the customer and photos. I'll know more when I get them in my hands.
![Smilie](/forums/images/smilies/smile.gif)
My opinion on this really doesn't matter. It's an opinion and needs to be checked out to verify. Being in this industry I know the damage forums have on a company and there's NO reason for me to get involved publically past the lifters. You're damn skippy I posted in here to stand up for my product...the information being spouted was blatantly wrong. I felt the need to correct it. No where did I say I found out about this yesterday, as Tim pointed out he's been talking to me about this since the beginning. Anybody who has dealt with our company or myself knows we don't run from problems. We figure it out, make improvements, and offer the solution. Issues will always pop up in this industry, although sometimes costly, but they allow you to rectify a weakness and improve the product. Answering some of those questions would have turned into another round of responses saying I was bashing a competitors product. Which is the last thing I'm trying to do. We both make quality performance lifters. Having options is great and as a consumer you should be happy to have different companies competing to be the "best". That's how we make more reliable horsepower...technological advancements.
The only fact on this particular topic is the lifters did not fail, or even show signs of wear. I've been doing this long enough to gather that information from the customer and photos. I'll know more when I get them in my hands.
Last edited by Havoc40; 11-29-2016 at 09:55 PM.
![Havoc40 is offline](/forums/images/statusicon/user_offline.gif)
#1783
Registered
Join Date: May 2015
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
The Comp parts didn't come from us. Interesting photo though!
![Havoc40 is offline](/forums/images/statusicon/user_offline.gif)
#1784
Charter Member#568
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
I'd send one of the cams to Randy/ Johnson if they'll look at it. No sense sending 2 cams that look the same to CM.
__________________
Straight bottoms and flat decks
Straight bottoms and flat decks
![bck is offline](/forums/images/statusicon/user_offline.gif)
#1786
Registered
![Default](/forums/images/icons/icon1.gif)
I have pretty thick skin and not bothered by stuff like this guys. Won't run me off that easy
. Been doing the forum thing for a long time and knew how this would turn out before I even posted, thus my 1st paragraph on my 1st post.
My opinion on this matter really doesn't matter. It's an opinion and needs to be checked out to verify. Being in this industry I know the damage forums have on a company and there's NO reason to for me to get involved publically past the lifters. You're damn skippy I posted in here to stand up for my product...the information being spouted was blatantly wrong. I felt the need to correct it. No where did I say I found out about this yesterday, as Tim pointed out he's been talking to me about this since the beginning. Anybody who has dealt with our company or myself knows we don't run from problems. We figure it out, make improvements, and offer the solution. Issues will always pop up in this industry, although sometimes costly, but they allow you to rectify a weakness and improve the product. Answering some of those questions would have turned into another round of responses saying I was bashing a competitors product. Which is the last thing I'm trying to do. We both make quality performance lifters. Having options is great and as a consumer you should be happy to have different companies competing to be the "best". That's how we make more reliable horsepower...technological advancements.
The only fact on this particular topic is the lifters did not fail, or even show signs of wear. I've been doing this long enough to gather that information from the customer and photos. I'll know more when I get them in my hands.
![Smilie](/forums/images/smilies/smile.gif)
My opinion on this matter really doesn't matter. It's an opinion and needs to be checked out to verify. Being in this industry I know the damage forums have on a company and there's NO reason to for me to get involved publically past the lifters. You're damn skippy I posted in here to stand up for my product...the information being spouted was blatantly wrong. I felt the need to correct it. No where did I say I found out about this yesterday, as Tim pointed out he's been talking to me about this since the beginning. Anybody who has dealt with our company or myself knows we don't run from problems. We figure it out, make improvements, and offer the solution. Issues will always pop up in this industry, although sometimes costly, but they allow you to rectify a weakness and improve the product. Answering some of those questions would have turned into another round of responses saying I was bashing a competitors product. Which is the last thing I'm trying to do. We both make quality performance lifters. Having options is great and as a consumer you should be happy to have different companies competing to be the "best". That's how we make more reliable horsepower...technological advancements.
The only fact on this particular topic is the lifters did not fail, or even show signs of wear. I've been doing this long enough to gather that information from the customer and photos. I'll know more when I get them in my hands.
![getrdunn is offline](/forums/images/statusicon/user_offline.gif)