Cam and valvetrain longevity....??? low duration high lift...
09-30-2016, 06:04 PM
#782
Registered
Well,, who new that page #77 would get the most interesting out of this thread. Doh !
I wonder if a call to Cam Motion 1stand then send good pics would be wise 1st. Obviously I know who else you are going to call, but that maybe better last..after all your ducks are put in a row.
A different cam guy has charged $700 on some cams done on a Sadi core.Believe it.
I wonder if a call to Cam Motion 1stand then send good pics would be wise 1st. Obviously I know who else you are going to call, but that maybe better last..after all your ducks are put in a row.
A different cam guy has charged $700 on some cams done on a Sadi core.Believe it.
Last edited by SB; 09-30-2016 at 06:28 PM. Reason: spelling
09-30-2016, 06:05 PM
#783
Gold Member
Gold MemberThread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,635
Likes: 0
Received 204 Likes
on
132 Posts
I will be sending Bob emails I'm not doing anything over the phone with that crook
Who new that page #77 would get the most interesting out of this thread. Doh !
I wonder if a call to Cam Motion 1stand then send good pics would be wise 1st. Obviously I know who else you are going to call, but that maybe better last..after all your ducks are put in a row.
Well,
A different cam guy has charged $700 on some cams done on a Saudi core.Believe it.
I wonder if a call to Cam Motion 1stand then send good pics would be wise 1st. Obviously I know who else you are going to call, but that maybe better last..after all your ducks are put in a row.
Well,
A different cam guy has charged $700 on some cams done on a Saudi core.Believe it.
09-30-2016, 06:07 PM
#784
Registered
You thinking the lifters are not sitting on the lobes flat or turning sideways a little ?
Yeh, where new Dart blocks and the beginning of Tim's mess was the lifters sticking in the bores....which a lot know is common with those Blocks and Morel lifters. I believe we did not hear if the lifter bores where indexed when they where honed afterwards.
Yeh, where new Dart blocks and the beginning of Tim's mess was the lifters sticking in the bores....which a lot know is common with those Blocks and Morel lifters. I believe we did not hear if the lifter bores where indexed when they where honed afterwards.
09-30-2016, 06:19 PM
#787
Gold Member
Gold MemberThread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,635
Likes: 0
Received 204 Likes
on
132 Posts
Lol you guys can say what you like, there's been many other and even posting pics of same exact results, I know it's all my fault again... Whatever...
09-30-2016, 06:21 PM
#788
Gold Member
Gold MemberThread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,635
Likes: 0
Received 204 Likes
on
132 Posts
You guys literally make me sick trying to prove that it's all my fault, I was informed long ago what I would find in that exact thing has happened but it's my fault that literally blows my mind the facts have been posted time and time again I'm not going round and round anymore about the stuff fact is those cams are destroying my engines you can keep using Bob but I certainly won't be
09-30-2016, 06:26 PM
#790
Gold Member
Gold MemberThread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,635
Likes: 0
Received 204 Likes
on
132 Posts
Yes I'm sure the other 30 camshaft that look just like mine needed the same thing the block was taken care of long ago I hashed all that out before
