aluminum head recommendations
#61
Registered
![Thumbs up](/forums/images/icons/icon14.gif)
Glad you guys resolved this...I was disappointed to see the situation deteriorate between two individuals who obviously have a long history. Sounds like Jim's a stand-up guy!
#62
Registered
![Default](/forums/images/icons/icon1.gif)
Dyno
The intakes need a bowl blend, with the camshaft your running I dont think you will see big gains as long as the port is stable (as far as airflow) up to max lift. The exhausts could use a little more work in the shorturns. Your looking at about $350.00 for the port work which would include some light deburring in the combustion chamber. I would guess a 20hp gain thanks
Thanks Sean
The intakes need a bowl blend, with the camshaft your running I dont think you will see big gains as long as the port is stable (as far as airflow) up to max lift. The exhausts could use a little more work in the shorturns. Your looking at about $350.00 for the port work which would include some light deburring in the combustion chamber. I would guess a 20hp gain thanks
Thanks Sean
Last edited by JimV; 10-31-2002 at 02:54 PM.