Guess the new power game!
09-06-2018, 03:06 PM
#1
Registered
Thread Starter
Guess the new power game!
After searching high and low for a local dyno I can’t find one to test my build so everyone is welcome to take a stab at it.
525EFI cam LIFT: .610"/.627" DURATION: 289°/297°
Edelbrock Performer RPM Oval heads with the chambers cleaned up.
Performer Rpm Airgap intake gasket matched
QF850m carb
Comp Cams magnum rockers
~10:1cr
09-06-2018, 03:30 PM
#4
Registered
0-565hp
09-06-2018, 03:52 PM
#6
Registered
557 hp.this was determined by the SWAG method.
09-06-2018, 06:52 PM
#7
Registered
1 miiiiiiiillllllllliiiiiiiiiooooooooooonnnnnnnnnn Hp,,correction factor may be a tad high.
09-06-2018, 09:20 PM
#9
Registered
09-06-2018, 09:47 PM
#10
Registered
Thread Starter
This guy doing pretty much the same build but with a smaller cam and lower compression got 588, but I’ll guess 575 which would be plenty. I’m still looking for a real dyno to find out.
Cam in the similar build. 242/248 duration, 0.566/0.566 lift, 112 LSA COMP stick.
