CMI headers
#52
Registered
#53
Registered
#54
Registered
#55
Registered
![Default](/forums/images/icons/icon1.gif)
i looked at the lightnings,, but the full stainless ones are not that much different in price than the cmi's. those welded together pieces just look like a future failure point to me.
#56
Registered
#57
Registered
![Default](/forums/images/icons/icon1.gif)
Deleted
Last edited by ThisIsLivin; 02-15-2019 at 08:41 AM. Reason: Deleted
#58
PF Marine
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
The KE Headers flow equal to about a 2" primary. The primary size needed and runner length needed for a motor is dependent upon a lot of factors such as exhaust port design, cam profile, and compression, but at a certain HP level you just need to get some flow.
If I had a NA motor, the KE would be my #1 choice as it is a 2" primary with a 4-2-1 collector and a full 32" equal runner.
That being said, we ran our KE headers to a solid 1500hp on a supercharged application, but I wouldn't recommend it. 800-1100hp blower motor is a toss up on that or stainless marine. Big HP blower motors I would go with Stainless marine for more flow.
If I had a NA motor, the KE would be my #1 choice as it is a 2" primary with a 4-2-1 collector and a full 32" equal runner.
That being said, we ran our KE headers to a solid 1500hp on a supercharged application, but I wouldn't recommend it. 800-1100hp blower motor is a toss up on that or stainless marine. Big HP blower motors I would go with Stainless marine for more flow.
Last edited by Coolerman; 04-14-2020 at 03:32 PM.