O2 Sensor question
#3
#4
Banned
Join Date: Aug 2017
Location: Osaka, Japan
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
There will always be moisture in a marine exhaust, the moisture/condensation will ultimately render the o2 sensor useless over time and you will have to replace them once in a while. Keep a spare with you. Or use an o2 bung as recommended by Baja above that will make it harder for the moisture to reach the o2 sensor.
#5
Registered
Are you running the NTK sensors? I was told that they work better in the marine environment.
These help also.
https://www.ebay.com/itm/INNOVATE-MO...gAAOSwhglTx8Y0
These help also.
https://www.ebay.com/itm/INNOVATE-MO...gAAOSwhglTx8Y0
#6
No I’m not yet. I’m replacing with Bosch and will get a bing extension and see how that does first. I was told same thing by my tuner. They are 100 more per unit and last a little longer.
#7
Are you running the NTK sensors? I was told that they work better in the marine environment.
These help also.
https://www.ebay.com/itm/INNOVATE-MO...gAAOSwhglTx8Y0
These help also.
https://www.ebay.com/itm/INNOVATE-MO...gAAOSwhglTx8Y0
#8
Registered
I never had any issues to begin with, but have always ran the Innovative bung extender from day one on my wideband.
When i put fuel injection on I got the 90° one that I listed as it’s pretty much the same but the bend allowed me to clock it so the sensor is way up away from the water. 50 or so hours so far and no issues.
When i put fuel injection on I got the 90° one that I listed as it’s pretty much the same but the bend allowed me to clock it so the sensor is way up away from the water. 50 or so hours so far and no issues.
#9
I never had any issues to begin with, but have always ran the Innovative bung extender from day one on my wideband.
When i put fuel injection on I got the 90° one that I listed as it’s pretty much the same but the bend allowed me to clock it so the sensor is way up away from the water. 50 or so hours so far and no issues.
When i put fuel injection on I got the 90° one that I listed as it’s pretty much the same but the bend allowed me to clock it so the sensor is way up away from the water. 50 or so hours so far and no issues.