Edelbrock heads
#1
Registered
Thread Starter
Join Date: Oct 2019
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Edelbrock heads
Looking at the victor jr big block heads from Edelbrock. They come with the 2.3 intake and 1.9 exhaust valves. I知 running old school 496 with 4.310 bore and I知 wandering if the valves are to big? I知 thinking they probably are and will need some grinding to clear deck. Probably better suited for a bigger engine but price is good on them.
#2
BEACH PARTY / HOLLOWPOINT
Platinum Member
I ran a set of Darts with 2.30 intakes on a standard bore 454. No issues though I知 sure it wasn稚 optimal. The engine was supercharged so probably not a big issue for us.