The Woooples are alive!
The following users liked this post:
getrdunn (04-29-2021)
#14
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
The sensor is in the intake runner , I think it reverts some exhaust at idle .
The other engine it`s in the back of the intake and the temps at idle read much lower .
Once I get on plane and there`s water thru the chiller , that temps drops like a rock.
Good eye thou lol
The other engine it`s in the back of the intake and the temps at idle read much lower .
Once I get on plane and there`s water thru the chiller , that temps drops like a rock.
Good eye thou lol
The following users liked this post:
Rookie (05-01-2021)
#15
Registered
![Default](/forums/images/icons/icon1.gif)
Man, that's some really cool hardware. How much boost are you targeting?
#16
Registered
![Default](/forums/images/icons/icon1.gif)
Like others said almost idles too smooth! Is there another tensioner that goes on or is the one pulley the only tensioner? I’m not super familiar with the bigger wooples
#18
Registered
Thread Starter
#19
Registered
#20
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
If they work as good as they look and combined with the Woofles , maybe?
It would be nice cause those props carried the boat absolutely perfect .
![](https://cimg2.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/1500x2000/20201009_145047_resized_401f5b41b4402862e3572ac67b0df56047747b21.jpg)
The following 3 users liked this post by ICDEDPPL: