1/2" fuel tank pick up tube
04-18-2023, 11:09 PM
#31
I found what I was looking for!!!!
Teague has them.
https://teaguecustommarine.com/10-an...-lock-hose-end
Teague has them.
https://teaguecustommarine.com/10-an...-lock-hose-end
04-19-2023, 11:49 AM
#32
Registered
Platinum Member
If you go to Weldons website they give diagrams on their suggestions for plumbing both carbed and efi systems. They recommend a 3/4 inch pickup line plumbed to a -12. Talking to one of their reps at Sema, they claim this is needed for their pumps to perform to specs. For some of you having fuel issues this might be a place to look.
The following users liked this post:
cheech (04-19-2023)
04-19-2023, 07:46 PM
#33
I wasn't able to find the diagram on their site.
https://www.weldonracing.com/
Found it interesting that they are not far from my house. Never knew that.
https://www.weldonracing.com/
Found it interesting that they are not far from my house. Never knew that.
04-19-2023, 07:55 PM
#34
Registered
Platinum Member
Select a pump go to tech specs. Then they will give you the routing for carb or efi.
The following users liked this post:
xlint89 (04-24-2023)
04-24-2023, 05:07 PM
#36
IF your worried about being USCG legal, no AN hose or pushlock that I know of is USCG rated . At 550 hp I would convert the -10 to the size hose you have attached to water separator, if its 3/8 ID, buy a female -10 x 3/8 adapter, IF its 1/2" ID, -10 by 1/2". Most USCG rubber fuel line is much thicker then you realize and smaller ID, IE, I would swear the 3/8 line was bigger because the rubber is so thick, Smitty
https://teaguecustommarine.com/trident-marine-fuel-hose
04-24-2023, 08:45 PM
#37
Registered
I’ve used marine fuel line hoses (not ‘push lock’ hoses) with push lock fittings before. So maybe they are doing the same ?
04-24-2023, 10:22 PM
#39
Registered
Must be which ? Reg marine fuel hose or push lock ?
Remember, my bulb glows dim
Remember, my bulb glows dim
04-25-2023, 06:15 PM
#40
I see CPperformance sells push lock hose, and it's not USCG rated.
So I'm assuming it's regular marine hose Teague is selling while using the push lock fittings.
The following users liked this post:
SB (04-25-2023)
