Chrome Paint
The following 2 users liked this post by RSCHAP1:
Twin O/B Sonic (09-08-2022), Wally (09-08-2022)
#12
Were doomed!
Charter Member
Myself and co-worker watched a bunch of videos a few months ago and found some pretty surprising coatings like:
https://www.youtube.com/watch?v=KBtdU10PIcE&t=113s
https://www.youtube.com/watch?v=fuJ8JKWFg8Y
https://www.youtube.com/watch?v=KBtdU10PIcE&t=113s
https://www.youtube.com/watch?v=fuJ8JKWFg8Y
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
The following users liked this post:
Twin O/B Sonic (09-08-2022)
#13
Platinum Member
Platinum Member
Thank you for the real world use/result of the product. I bought some of Eastwoods chrome recently, but have yet to try it.
2% increase in HP is pretty good for some plastic pipe and paint!
Adds mental HP as well, which is priceless
Looks like fun to me!
2% increase in HP is pretty good for some plastic pipe and paint!
Adds mental HP as well, which is priceless
Looks like fun to me!
The following users liked this post:
Twin O/B Sonic (09-08-2022)
#14
Registered
Thread Starter
Hilarious too that I am debating some establishment MG types on the users forum on what I am doing.
They type 2 pages on why it won’t work!
Just told them to bring their MGB and race me 0 - 60 😂🤓😎
Took me 4 tries to get it but I’m definitely there.
Or actually, very close.
W/what I’d done before the ram/cold air, it would pull cleanly to 5500 in all gears.
Which is good for the tractor motor in the MGB.
W/the ram air it will now pull 6k in 1st before you’re ready to shift!
Way cool stuff.
For next to nothing!
Sometimes it pays to be a red neck!
Almost gave up on the MG idea because it was all about me building a hot rod motor for one and I studied the motor!
What a turd!
Bigger stroke than bore, siamesed intake and exhaust ports, 3’ long rods…..
You couldn’t pick a worse 4 banger to hot rod!
W/what this thing is showing me, for how much air it wants, through 1.5” carburetors………, I am stunned.
On the toy side though, they’re still cheap, parts are easier to find and cheaper than for your wife’s Honda!
I can go out in the shop w/a cup of coffee on a Saturday morning while the Mrs is still sleeping, for a 1/2 hr, and find something to fix/improve/update.
And I go back in the house w/a smile on my face.
Fun too that growing up as a muscle car guy, always thought these cars were “cute” but turds.
Now I get it.
The factory owners manual lists front/rear weight bias!
Within 2 lbs!
A blast to slide around corners!
A new Corvette I couldn’t drive at 5/10’s, this thing you can drive at 10/10ths and you’re only doing 60!
They type 2 pages on why it won’t work!
Just told them to bring their MGB and race me 0 - 60 😂🤓😎
Took me 4 tries to get it but I’m definitely there.
Or actually, very close.
W/what I’d done before the ram/cold air, it would pull cleanly to 5500 in all gears.
Which is good for the tractor motor in the MGB.
W/the ram air it will now pull 6k in 1st before you’re ready to shift!
Way cool stuff.
For next to nothing!
Sometimes it pays to be a red neck!
Almost gave up on the MG idea because it was all about me building a hot rod motor for one and I studied the motor!
What a turd!
Bigger stroke than bore, siamesed intake and exhaust ports, 3’ long rods…..
You couldn’t pick a worse 4 banger to hot rod!
W/what this thing is showing me, for how much air it wants, through 1.5” carburetors………, I am stunned.
On the toy side though, they’re still cheap, parts are easier to find and cheaper than for your wife’s Honda!
I can go out in the shop w/a cup of coffee on a Saturday morning while the Mrs is still sleeping, for a 1/2 hr, and find something to fix/improve/update.
And I go back in the house w/a smile on my face.
Fun too that growing up as a muscle car guy, always thought these cars were “cute” but turds.
Now I get it.
The factory owners manual lists front/rear weight bias!
Within 2 lbs!
A blast to slide around corners!
A new Corvette I couldn’t drive at 5/10’s, this thing you can drive at 10/10ths and you’re only doing 60!
Last edited by Twin O/B Sonic; 09-08-2022 at 06:29 PM.
The following 3 users liked this post by Twin O/B Sonic:
#16
VIP Member
VIP Member
Twin,
I'm not sure what they use. They are VERY tight-lipped about it, though....
Chrome painted guitar
Thanks. Brad.
(937)545-8991
I'm not sure what they use. They are VERY tight-lipped about it, though....
Chrome painted guitar
Thanks. Brad.
(937)545-8991
#17
Registered
Myself and co-worker watched a bunch of videos a few months ago and found some pretty surprising coatings like:
https://www.youtube.com/watch?v=KBtdU10PIcE&t=113s
https://www.youtube.com/watch?v=fuJ8JKWFg8Y
https://www.youtube.com/watch?v=KBtdU10PIcE&t=113s
https://www.youtube.com/watch?v=fuJ8JKWFg8Y
Alsa has made some pretty crazy paints for years