2005 Merc 4.3 stalling
#1
Registered
Thread Starter
Join Date: Jul 2024
Location: Biloxi
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
2005 Merc 4.3 stalling
I have a 2005 MerCruiser 4.3 MPI. The motor stalls after acceleration or when comes back to idle
The following have been done
1 computer hooked up and fault codes showing are 94 which is a Pitot Pressure circuit which can not be cleared. Don’t think this is the problem
2 changed out IAC twice and is working properly along with new screen but you can unplug and plug back up with me difference. Getting 12 volt at the plug-in
3 new fuel pump with 40 psi
4 timing set
5 Injectors cleaned
6 new dist cap rotor plugs
Any help would be appreciated
The following have been done
1 computer hooked up and fault codes showing are 94 which is a Pitot Pressure circuit which can not be cleared. Don’t think this is the problem
2 changed out IAC twice and is working properly along with new screen but you can unplug and plug back up with me difference. Getting 12 volt at the plug-in
3 new fuel pump with 40 psi
4 timing set
5 Injectors cleaned
6 new dist cap rotor plugs
Any help would be appreciated