Cursed
08-17-2024, 02:53 PM
#51
Registered
The mefi has been a pain, there`s something not right. I thought it was inteference but it may be a grounding issue in the harness.
I`m pulling the engines, an annual tradition, going thru everything, switching to Holley.
I`ll make Bad Kitty, purrrrr fect for next year.
I`m pulling the engines, an annual tradition, going thru everything, switching to Holley.
I`ll make Bad Kitty, purrrrr fect for next year.
The following 6 users liked this post by IGetWet:
Brad Christy (08-17-2024), dykstra (08-20-2024), offshorexcursion (08-17-2024), OLDRAT (08-21-2024), sonicss42 (08-19-2024), Sydwayz (08-19-2024)
08-17-2024, 03:44 PM
#52
VIP Member
VIP Member
The following users liked this post:
offshorexcursion (08-17-2024)
08-18-2024, 10:43 PM
#53
Registered
Thread Starter
Let`s get this party started !!
The following 10 users liked this post by ICDEDPPL:
1983ScarabIII (08-19-2024), 87MirageIntruder (08-19-2024), Brad Christy (08-19-2024), Diamond Dave (08-19-2024), dykstra (08-20-2024), IGetWet (08-19-2024), jeff32 (08-19-2024), OLDRAT (08-21-2024), Rookie (08-19-2024), sonicss42 (08-19-2024)
08-19-2024, 08:51 AM
#54
Forum Regulator
VIP Member
08-19-2024, 09:11 AM
#55
Registered
Dan,
I am all for innovation and creative ways of doing things. Your engine hoist arrangement is interesting. Would it have been easier to pull the boat out of the building and use the crane? Pulling off a roof panel to me is adding more work, just wondering. I do like the engine lift plate, got to get one of those myself for the winter project. I have a boom made for the forklift to pull the boat engines here.
I am all for innovation and creative ways of doing things. Your engine hoist arrangement is interesting. Would it have been easier to pull the boat out of the building and use the crane? Pulling off a roof panel to me is adding more work, just wondering. I do like the engine lift plate, got to get one of those myself for the winter project. I have a boom made for the forklift to pull the boat engines here.
08-19-2024, 09:30 AM
#56
Registered
Thread Starter
Would have been easier to use a crane for sure. At $500/hr. I`ll spend the extra 10 minutes pulling the roof panel and take my time lol.
Not a building .. just a boat shed .
Not a building .. just a boat shed .
The following 5 users liked this post by ICDEDPPL:
1983ScarabIII (08-19-2024), 87MirageIntruder (08-20-2024), Diamond Dave (08-19-2024), OLDRAT (08-21-2024), SB (08-19-2024)
08-19-2024, 10:22 AM
#58
Registered
I love that the wife helps that is AMAZING!!!
The following 2 users liked this post by Diamond Dave:
Tartilla (08-20-2024), tommymonza (08-19-2024)
08-19-2024, 10:43 AM
#59
Platinum Member
Platinum Member
Erica is a boat guy's perfect partner, doesn't shy away from any of it, Dan's got a keeper for sure.
The following 6 users liked this post by F-2 Speedy:
Brad Christy (08-19-2024), dykstra (08-20-2024), ICDEDPPL (08-19-2024), Tartilla (08-20-2024), TomZ (08-20-2024), Twin O/B Sonic (08-20-2024)
08-19-2024, 10:47 AM
#60
VIP Member
VIP Member
My wife is all in on the upkeep of the boat, as far as cleaning and such. But she's out for any kind of mechanical stuff. She didn't even want to hear any progress reports on either the injector project or the pop-up cleat project. The complete engine rebuild project is going to be a hoot for her....
Thanks. Brad.
The following users liked this post:
87MirageIntruder (08-20-2024)
