Fuel distribution
#1
Registered
Thread Starter
Fuel distribution
Is pretty bad on this set up. #7 pig rich. #1 leanest.
I`ve never had a flat bottom intake , mine were always tented.
I`ve had 8-71, 10-71, 8.3 Whipple and none were thi sbad.
The blower is a TBS Retro Hi -Helix 14-71 with injector plate.
Does not have a delta opening .
Im thinking of getting the intake I used to run but not sure if that`s the issue.
https://www.rbssuperchargers.com/Pro...in--1100-0017A
Open to any experiences .
I`ve never had a flat bottom intake , mine were always tented.
I`ve had 8-71, 10-71, 8.3 Whipple and none were thi sbad.
The blower is a TBS Retro Hi -Helix 14-71 with injector plate.
Does not have a delta opening .
Im thinking of getting the intake I used to run but not sure if that`s the issue.
https://www.rbssuperchargers.com/Pro...in--1100-0017A
Open to any experiences .
#2
Registered
Quick sidetrack for my knowledge. Those plugs conewith a .031” gap. What do you gap them too on these engines ?
The following users liked this post:
articfriends (09-05-2024)
#4
Registered
Thread Starter
I leave the gap the same .
Yes I`m using Boostane , turns the pugs orange .
I have a few ideas to fix this .
Yes I`m using Boostane , turns the pugs orange .
I have a few ideas to fix this .
The following users liked this post:
articfriends (09-05-2024)
The following users liked this post:
ICDEDPPL (09-08-2024)