Whipple chargers pulleys
#1
Platinum Member
Platinum Member
Thread Starter
Whipple chargers pulleys
I want to turn the wick up a bit on my whipples, I went to there website but couldn't find pulleys sizes, any help appreciated
TIA
Speedy
TIA
Speedy
Last edited by Griff; 09-18-2024 at 11:25 PM.
#2
Platinum Member
Platinum Member
Eddie has always called them and told them the sizes he needed when he has ordered mine. Give him a call or go straight to whipple for them. Also Eddie may have what you need right there at the shop. I know a few of mine are still there along with a large stack of other whipple pulleys.
#3
Platinum Member
Platinum Member
Thread Starter
Eddie has always called them and told them the sizes he needed when he has ordered mine. Give him a call or go straight to whipple for them. Also Eddie may have what you need right there at the shop. I know a few of mine are still there along with a large stack of other whipple pulleys.
#4
Registered
The following users liked this post:
F-2 Speedy (09-19-2024)
#5
Platinum Member
Platinum Member
I'm running a 3 5/8 currently, which has me safely outside the limits of my fuel pumps and the closed loop cooling. I might get away with 3 1/2, but if went any smaller I would have to make some big changes.
#6
VIP Member
VIP Member
#7
Platinum Member
Platinum Member
Thread Starter
Who changed my title it was suppose to read Whooples..........
The following users liked this post:
ICDEDPPL (09-19-2024)
#8
Registered
The following users liked this post:
F-2 Speedy (09-19-2024)
#9
Platinum Member
Platinum Member
Thread Starter
OSD, what diameter are the ones you have ?
#10
VIP Member
VIP Member