drive height on 32 skater
12-10-2002, 06:05 PM
#1
Registered
Thread Starter
Join Date: Mar 2002
Location: cincinnati ohio
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
drive height on 32 skater
any suggestions on where to set the drive height with stellings boxes and bravo drives
this is the new style skater 32 bottom
this is the new style skater 32 bottom
Last edited by sangercat; 12-10-2002 at 06:12 PM.
12-11-2002, 12:58 PM
#3
Official OSO boat whore
Charter MemberJoin Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
I have a 26' firehawk with a single and a 2" shortie drive on a stellings box . The boat also has a 12" notched transom. I have my shaft set 1" above the bottom and it planes out with absolutly no slippage. I unfortinatly havn't had a chance to try any high speed tests with the boat, but I'm thinking about going up another 1/2-1". With your boat, I'd start at 1 1/2 - 2" above and go up from there.
I don't know what drive you have, but this is the point where prop shafts are breaking on Bravos-even with mild power. Please exercise care.
I don't know what drive you have, but this is the point where prop shafts are breaking on Bravos-even with mild power. Please exercise care.
Last edited by Cord; 12-11-2002 at 01:00 PM.
