Thunderbolt Ign.
#1
Registered
Thread Starter
Join Date: Jul 2002
Location: tuc, az.
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Thunderbolt Ign.
Does anyone know if a Thunderbolt IV ign. set-up has a built in rev-limiter. Part no. on the module is IG25A-V8-24S. And if so, what is it? Thx.
#3
Registered
Join Date: Sep 2002
Location: Lewis Center, Ohio
Posts: 3,606
Likes: 0
Received 0 Likes
on
0 Posts
correct, Thunderbolt IV ignition has no rev limiter, took mine up to 5800 to find out!!! (stupid, i know, but if my 4.3 blows up it is good reason for a new 350)
#4
Ginger or Mary Ann?
Charter Member
Sorry, but yes they can. My T-IV does have a limiter. Also is shown in my Merc manual. Not sure what the limit is, but I also have seen 5800 with it at times. Maybe not working??? BTW, the limiter is not in the module, it's a separater componant.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
#5
Gone Fishin'
Charter Member
Join Date: Nov 2000
Location: Grand Rapids/Holland/Grand Haven
Posts: 7,408
Likes: 0
Received 0 Likes
on
0 Posts
I've got one laying around here somwhere that I know doesn't have a limiter. Had it way up there a couple of times in years past.
__________________
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
#7
Official OSO boat whore
Charter Member
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
US1-are you sure you don't have a Tbolt-5? The stock 4's did not come with a limiter.
#8
Ginger or Mary Ann?
Charter Member
Originally posted by Cord
US1-are you sure you don't have a Tbolt-5? The stock 4's did not come with a limiter.
US1-are you sure you don't have a Tbolt-5? The stock 4's did not come with a limiter.
In fact, I just went out to double check and make sure that it did have IV on my module just to be sure. And, here is the ignition parts breakdown from my motor. Item #43
T-bolt IV ignition
Maybe this only applies to the HP series motors?
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Last edited by US1 Fountain; 01-05-2003 at 09:06 PM.
#9
Charter Member # 55
Charter Member
To my recent surprise, some Tb IV's DO HAVE rev limiters.
My '93 454mag does not have one and my '96 525SC does. I've hit it(5300rpm) on the 525SC trying a smaller prop. Both are TB IV's. My Merc Manual for High Performance Engines says that the HP425, HP450, HP465, HP500, 525SC, 600SC, and 800SC are all equipped with TB IV's and rev limiters. There is nothing in the manual, that I have found, that shows anything about the actual limits or where the limiter is located.
My '93 454mag does not have one and my '96 525SC does. I've hit it(5300rpm) on the 525SC trying a smaller prop. Both are TB IV's. My Merc Manual for High Performance Engines says that the HP425, HP450, HP465, HP500, 525SC, 600SC, and 800SC are all equipped with TB IV's and rev limiters. There is nothing in the manual, that I have found, that shows anything about the actual limits or where the limiter is located.
#10
Official OSO boat whore
Charter Member
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Hmmmm....so maybe it's just the black motors that didn't come with a limiter. That would make sense...sorta....