Roooooster Tail...
Platinum Member
01-19-2003, 09:26 PM
#12
Guest
Posts: n/a
Originally posted by Waterfoul
So, I have not been keeping up on this (sorry). Did you swap out Bravo's?? If so, what kind of performance differences with the Pulse Drives??
So, I have not been keeping up on this (sorry). Did you swap out Bravo's?? If so, what kind of performance differences with the Pulse Drives??
01-20-2003, 06:47 AM
#13
Registered
Thread Starter
Join Date: Mar 2002
Location: US Virgin Islands
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Hey Dale, Harry likes a challenge. The Pulse should do well on an ice boat... now all ya gotta do is figure out where to put the motors! As far as the weather, check this out
Waterfoul, yes, took off the POS Bravos and installed the Pulse. Check the thread "Pulse Drive Installation" for all the details. We have to play with the props a little, but I am going as fast as I did with the Bravos but my RPM is down. I'm going to be in Florida in a week so I am bring in the props for a little tuning. Right now I am turning only 4600 RPM and should get 5200.
Also, I've found another reason for the Pulse! you can get more chicks on the back
Mongo
Waterfoul, yes, took off the POS Bravos and installed the Pulse. Check the thread "Pulse Drive Installation" for all the details. We have to play with the props a little, but I am going as fast as I did with the Bravos but my RPM is down. I'm going to be in Florida in a week so I am bring in the props for a little tuning. Right now I am turning only 4600 RPM and should get 5200.
Also, I've found another reason for the Pulse! you can get more chicks on the back
Mongo
