Making of a Race Fairing (Formula 302)
#141
Charter Member #232
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Hey how about I smack your azz back to Caniduh. Still not sure how I missed that one. I got it fixed however just a little yankee engineering from my machinist buddy ![Big Grin](/forums/images/smilies/biggrin.gif)
Jon
![Big Grin](/forums/images/smilies/biggrin.gif)
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#142
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Originally posted by Audiofn
...I got it fixed however just a little yankee engineering from my machinist buddy...
...I got it fixed however just a little yankee engineering from my machinist buddy...
![Big Grin](/forums/images/smilies/biggrin.gif)
#143
Guest
Posts: n/a
![Default](/forums/images/icons/icon1.gif)
Jon, I am really indebted to you for the heads up on Nydacore honeycomb. I ordered a bunch from Composites 1 and did all the horizontal and vertical panels in my 35 Cigarette Awesome interior with the honeycomb and 1/8" mahogany plywood with epoxy. There are some pics under 35 Awesome in the Cigarette owner's section. I saved at least 350 pounds. I was also able to do curved vertical panels. It's really looking good I think. Many thanks, and your project looks really nice. Bob.
#144
Charter Member #232
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Bob glad it worked out well for you. I am off to look at your project as the interior of my boat is next.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#148
Registered
![Default](/forums/images/icons/icon1.gif)
Jon, the project looks good , when is this boat going to hit the water? Will you be going to the milk run in VT.? Keep up the good work.
mark
mark
#149
Charter Member #232
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Thanks Masi. I was really hoping to make the Milk run but unfortunatly am almost possitive that I will not be able to.
![Frown](/forums/images/smilies/frown.gif)
__________________
Put your best foot forward!
Put your best foot forward!
#150
Charter Member #232
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
This is after we laid up the glass. It is one piece of DB glass that is going up and over the top and back down the other side. I had a friend help me out with this as you have to move fast with the resin. His words of wisdome were to get the resin out of the cup. He said to not sit there and try and get the resin to soke in in a small area but to just spread it out all over the glass and let it soak in itself. Then he said go back and get it to soak in. Seemed to work very well as we had no resin kick in the bucket.
__________________
Put your best foot forward!
Put your best foot forward!