desk top dyno info help
02-26-2003, 09:40 AM
#1
VIP Member
VIP MemberThread Starter
desk top dyno info help
Could someone who has a desk top dyno please run this
engine package for me.
502
10 to 1 Compression
AFR 315 Aluminum heads
380 intake flow at 600
Crane 139651
306/318
632/632
244/256 @ .05
Stelling dry headers
Victor Jr. Intake and 830 holley
Thanks for your help.
engine package for me.
502
10 to 1 Compression
AFR 315 Aluminum heads
380 intake flow at 600
Crane 139651
306/318
632/632
244/256 @ .05
Stelling dry headers
Victor Jr. Intake and 830 holley
Thanks for your help.
02-26-2003, 10:34 AM
#2
Registered
645hp @5500
620ft lbs of torque @5000
I would say you probably cruise at about 3500-4000rpm
3500rpm 348hp 522tq
4000rpm 429hp 563tq
This is with a 2.25" intake valve and fully ported rectangle heads-----this is as about as close as you're going to get with the Desk Top Dyno
620ft lbs of torque @5000
I would say you probably cruise at about 3500-4000rpm
3500rpm 348hp 522tq
4000rpm 429hp 563tq
This is with a 2.25" intake valve and fully ported rectangle heads-----this is as about as close as you're going to get with the Desk Top Dyno
02-26-2003, 10:39 AM
#4
VIP Member
VIP MemberThread Starter
Kaama
Again thanks does the desktop dyno have a spread sheet like
real dyno is so could you fax it to me at 816-242-0449
Could you give me your phone again thanks greg
Again thanks does the desktop dyno have a spread sheet like
real dyno is so could you fax it to me at 816-242-0449
Could you give me your phone again thanks greg
