Master Lube Oil Pre-lube
#21
Registered
Join Date: Oct 2000
Location: Knoxville,TN, USA
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
pre luber
I am interested in getting in on the deal to purchase two pre lubers. Are they a good fit for GEN V 502EFI's. That is, mechanically speaking as in mounting hardware and such.
I'm definitely interested in two pieces.
I'm definitely interested in two pieces.
#24
(aka) Pure Adrenaline
Platinum Member
Now wait a minute, these are new 3 quart with all the Stainless Steel hose and fittings for Marine use.
I'm not sure where you bought them but you got one hell of a deal. Someone must have goofed on your order pricing but to your advantage
I'm not sure where you bought them but you got one hell of a deal. Someone must have goofed on your order pricing but to your advantage
Last edited by Doug; 03-23-2003 at 01:58 PM.
#25
Registered
Thread Starter
Join Date: May 2001
Location: St. Joseph, MI
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Ok, Whats the story.....Big Yellow, in one post you say you paid 410. I'll assume that was for 2 units. Then you offer additional ones for 200 ? What is the part number and are you a dealer ?
#28
Registered
Join Date: Mar 2001
Location: Tampa, FL USA
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Tyson,
Ill take two for $200 each if this is the 3 quart. Feel free to call me with more info at 813 227-9779 or email to [email protected]
Ill take two for $200 each if this is the 3 quart. Feel free to call me with more info at 813 227-9779 or email to [email protected]
#29
Registered
Join Date: Aug 2001
Location: Gainesville Fl.
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
What up Andy.I have the Canton three qt .model and I love it ,the only thing I need to change is I used the elect. valve on a key switch which works well but there is no way off stopping the oil from going back into the preluber if you don't want it to .Case in point I blew out the front seal and when I stoped was low on oil and if I could have dumped the preluber and then closed it off then restarted there would have been more oil in the pan and none in the preluber.Bottom line I want to have both elect and manual valves,that way I do not have to lift the hatch every time I go to prelub and the manual if there is a large oil leak to be able to take it out of the system.