Engine compartment cover lifter
#1
Registered
Thread Starter
Join Date: Mar 2003
Location: Hattiesburg, Ms
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
Engine compartment cover lifter
I recently came to own a 1986 357SR1 Kaama but someone had removed the hydraulic device that lifts the engine cover. Anybody know where I should start looking for one?
Doc
Doc
#5
Registered
Join Date: Jan 2001
Location: ST. Louis, MO, USA
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
Electric is simpler and easier. Try CP Performance, Rex Marine, and Eddie Marine. All online. I'm pretty sure they all have electrics too. BTW they make different length ones too.
Gary
Gary
#7
Charter Member #232
Charter Member
Try Gaffrig. They make one. I have to put one on my boat as well. Ellectrics are ok but they are slower then Hydrolic.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#8
Registered
Dana Marine Products make a really cool looking hydraulic one that fits on the sides of the engine compartment. With this system, you wouldn't have the pole running down the middle of your engineroom.
#9
Registered
Join Date: Mar 2001
Location: Tampa, FL USA
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
The Dana unit is very fast and sells for around $900 for the pair of hinges, hydraulic rams and pump and dead battery release. Looks wise, there is nothing fancier. You would need to see if you have proper mounting capability, clearance to exhaust, etc. This unit replaces your rear hinges.