Lifter noise and oil weight/qty??
#11
Registered
Join Date: Oct 2000
Location: Kentucky - where the women are so fast we have to put a governor on 'em!!
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Cam, lifters, rockers, valves, springs, etc., are all brand new. Only thing not new are the pushrods, and they only ran for two seasons, I believe.
#12
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
OK, Plan is to change oil as it got a little milky from running at idle 20 minutes with no water temp. Adjustment is at 1 turn on #1 in/ex and 3 ex. Run it below 3200 for 5 minutes or so check plugs ( new blower and Nickerson carb) and if all is well repeat several times. Then back them down to 1/2 and tighten till they are quite. I am betting that will be quite at a 1/2 or 3/4. I suspect assembly lube etc. was stopping up 1 in/ex and 3 ex.