Dave M

Hey Steve,

Do you have a website that describes your motors?

imongo

Yeah, sure Steve... Actually, I think you and Eddie have something going on! We're starting work on the boat today. Yanking the old motors and taking them down. I even get to find out what went with the old one. I'll keep ya posted...

Mongo

Bulldog

I was at Total Marine Performance a week ago and saw some real race engines. OHC Big block Chevies. They set a Pinto head onto a Merlin block and start drilling....and used a pizza box to make a head gasket Those guys can build anything!!!!!


Steve- I enjoyed the visit to your facility. To all out there these guys have some REAL nice stuff, and helped me out over the phone with advice on a drive installation problem. Thanks again!

Ronnie AKA Bulldog

totalmp

Thanks Ronnie, we're always happy to help. So many marine shops won't help without cash. We love boats, and don't mind talking shop. Anyone with questions, don't hesitate to call. We've learned a bit over the years, and try something new everyday, and we're glad to share it.

Steve

imongo

Yo Steve,

Yeah, the Pinto motors are fitting in the engine room much easier than the old big blocks! I should be posting photos tonight. Been dealing with "plumbing" issues with the new oil coolers and fuel pumps. It's hard to find all the right pieces let alone 4 of each! We have most of it worked out and should start them this afternoon.

Mongo

convincor

Mongo,
What are you using for coolers?

Steve,
What do you suggest for stock 502?

totalmp

We use a custom 3x18 cooler. It substantially reduces engine temp over stock cooler, and increases oil volume more than a quart.

convincor

Do you use a thermostat for the oil ???

totalmp

No, that is overkill in your setup. These coolers work great w/o it.

convincor

My concern would be the oil not getting hot enough with a cooler that size.
Do you think the 16"merc. combo cooler, (oil & p/s) is to small??

The cooler you use, is it a combo??
How much????