SBC/Vortec Intake Gasket Recomendation
05-09-2003, 03:12 AM
#1
Registered
Thread Starter
Join Date: Jul 2001
Location: SW Ohio
Posts: 770
Likes: 0
Received 0 Likes
on
0 Posts
SBC/Vortec Intake Gasket Recomendation
Well I need to REPLACE
my intake gaskets on my problem child....Any recomedations on intake gaskets or even installation? If I remember some people (including me!) were having problems with some types/brands of intake gaskets for the sbc vortec heads....
Thanks.
BH
my intake gaskets on my problem child....Any recomedations on intake gaskets or even installation? If I remember some people (including me!) were having problems with some types/brands of intake gaskets for the sbc vortec heads....Thanks.
BH
05-09-2003, 06:43 AM
#2
Guest
Posts: n/a
05-09-2003, 01:36 PM
#5
Were doomed!
Charter Member
You can get it for $16.65 instead of the 21.91 that place charges!
I get all my GM parts from these guys 
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
05-09-2003, 01:38 PM
#6
Were doomed!
Charter Member
Oh and on the first page olysan gave it says at the bottom "Note: Vortec intake bolts require only 11 ft./lbs. of torque"
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
05-09-2003, 02:08 PM
#7
Registered
Originally posted by Wally
Oh and on the first page olysan gave it says at the bottom "Note: Vortec intake bolts require only 11 ft./lbs. of torque"
Oh and on the first page olysan gave it says at the bottom "Note: Vortec intake bolts require only 11 ft./lbs. of torque"
16.65 is a good price, that is my cost from GM as a chevy dealer.
05-10-2003, 06:11 PM
#9
Registered
Thread Starter
Join Date: Jul 2001
Location: SW Ohio
Posts: 770
Likes: 0
Received 0 Likes
on
0 Posts
Well I bought the GM 12529094 gaskets. Yeah they only reccomend only 11 ft/lbs! Also they say "DO NOT use ANY type of gasket sealer on the intake gaskets. The O-rings are designed to seal without chemical sealers." Makes me a little nervous about not putting anything around the water passages....Thoughts anyone
BH
BH
Last edited by BAD-HABIT; 05-10-2003 at 06:23 PM.
