Go Back  Offshoreonly.com > Technical > General Q & A
Ignition cutout... hard wave? >

Ignition cutout... hard wave?

Notices

Ignition cutout... hard wave?

Thread Tools
 
Old 05-28-2003, 08:03 PM
  #11  
Charter Member # 545
Gold Member
 
Beak Boater's Avatar
 
Join Date: Dec 2000
Location: Port Tobacco MD/Cape Coral Fl
Posts: 2,152
Received 2 Likes on 2 Posts
Default

Had a friend with a foutain that had a similar problem, drove him crazy checked out everything he could imagine. Turned out to be a screw throught the side of the boat from the rub rail hitting a wire.
Beak Boater is offline  
Old 05-28-2003, 08:14 PM
  #12  
Charter Member #818
Charter Member
 
MACDAD260's Avatar
 
Join Date: Jan 2001
Location: West Michigan & Higgins Lake
Posts: 644
Likes: 0
Received 0 Likes on 0 Posts
Default

bajalion has a good point. Eliminate as many possibilities as you can before changing parts. That can get expensive.
MACDAD260 is offline  
Old 05-28-2003, 10:13 PM
  #13  
Registered
 
Join Date: Oct 2002
Location: Cape Coral,Florida
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

What year and type of ignition system?
JohnnyM is offline  
Old 05-29-2003, 10:44 AM
  #14  
Registered
 
klmken's Avatar
 
Join Date: Jun 2001
Location: Alexandria, VA
Posts: 618
Likes: 0
Received 0 Likes on 0 Posts
Default

had a similar problem and it turned out to be clogged fuel filter.
klmken is offline  
Old 05-29-2003, 03:11 PM
  #15  
Registered
 
32storm's Avatar
 
Join Date: May 2002
Location: Rochester, NY
Posts: 589
Likes: 0
Received 0 Likes on 0 Posts
Default

Had same problem on 1st boat I ever owned. If landed hard, the engine stopped. If crossed big wake, engine stopped. Turned out to be the ignition switch also. If I had boat idling and smacked the dash hard by the switch, the engine stopped. Replaced switch and problem was solved
32storm is offline  
Old 05-30-2003, 07:08 AM
  #16  
Registered
Thread Starter
 
jollyroger's Avatar
 
Join Date: Mar 2002
Location: Lake Winni, NH
Posts: 81
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up Update....

Well, after essentially tearing apart every connector on the boat, I started over from scratch. Everyone tells you its usually something stooopid and it was...

BAD GAS!

I thought I had ruled that possibility out as I had just put on a new Fuel/Water separator. I thought wrong. There must have been a ton of water in my tank, becaue the new one was filled with water.

I am guessing what was happening is that water was getting past the fuel water separator and into the combustion chambers, causing detonation under load conditions. This was tripping the knock sensor, causing the boat to momentarily shut down. I might be wrong on this theory, but with some drygas, some fresh gas, and a new fuel watrer separator she is back to running like a champ.

Now if only the rain would stop.... rain at 74mph hurts!


Woodsy Von Idiot
jollyroger is offline  
Old 06-02-2003, 06:06 PM
  #17  
Registered
 
SSComp's Avatar
 
Join Date: Jan 2001
Location: Akron, OH
Posts: 856
Likes: 0
Received 1 Like on 1 Post
Default

Glad it was simple!!!
SSComp is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HPJunkie
Drives and Lower Units
6
01-27-2008 11:20 AM
superwrench0166
Drives and Lower Units
3
05-29-2007 06:34 PM
MAX VELOCITY
General Q & A
6
07-29-2003 10:13 PM
Rambunctious
General Q & A
8
03-03-2003 11:35 AM
GregP
General Q & A
7
01-14-2003 09:26 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Quick Reply: Ignition cutout... hard wave?


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.