Remote Oil filter mount advice needed
#1
Registered
Thread Starter
Join Date: Jan 2002
Location: Davenport, IA
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I am pulling my 7.4 MPI and want to keep it complete with all accessories. I purchased a built up 468 but it currently has no remote oil filter. I did purchase a Hardin marine billet adapter that eliminates the bypass. I ordered a remote filter mount but after getting it realized it was for a Ford filter. I ordered another from CP but did not pay close enough attention and see that it has huge #12 AN fittings. The bypass uses 1/2" NPT pipe thread. The Oil Cooler I bought also has 1/2" NPT pipe thread. I bought some 90 degree fittings that use #8 push lock fittings. That is what the guy used on the Oil cooler that I bought. Where can I get a remote filter mount with 1/2" NPT pipe thread? Doesn't look like CP has such an animal. The one I got with the #12 AN fittings is Beautiful, but I am not planning on going with stainless braided and anodized AN fittings. I am assuming the #8's are large enough. Do you agree? I just want a basic no frills remote cooler mount.
#3
![Default](/forums/images/icons/icon1.gif)
Jeg's has one that look's good.
Perma Cool part # 1793.
Jeg's part # 771-1793
Only $18.95
Summit also has it but they don't show a pic.
You have to do a manufacturers search with Summit.
Perma Cool part # 1793.
Jeg's part # 771-1793
Only $18.95
Summit also has it but they don't show a pic.
You have to do a manufacturers search with Summit.