Mirage Props with stenciling
05-27-2003, 10:13 PM
#1
Registered
Thread Starter
Join Date: Jul 2002
Location: Houston,texas
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
Mirage Props with stenciling
Does anyone have any idea what kind of machine does the etching on the Mirage props, that say " BajaPropellers " is this a computerized stenciling maching or what? any ideas,I think it would be neat to have a machine etch a prop pre programed for what you want it too say./Darin
I know it can be polished off if too much pressure is applied.thanks for any comments.
I know it can be polished off if too much pressure is applied.thanks for any comments.
Charter Member
05-27-2003, 10:30 PM
#3
Registered
Thread Starter
Join Date: Jul 2002
Location: Houston,texas
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
Cord/laser etching/no stickers/
Thank's now I know. I guess we will have to stick with the metal stamps.
I like stickers but they end up in the water and thats not good. Thanks Darin
I like stickers but they end up in the water and thats not good. Thanks Darin
