Thanks OSO folks for the Tech Advice on the Quad Rotor - **VIDEO **
#1
Registered
Thread Starter
Join Date: Jan 2003
Location: Broken Arrow, OK
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
Thanks OSO folks for the Tech Advice on the Quad Rotor - **VIDEO **
Got this quad rotor put in the boat. Put 1.36 gears and a 34p prop on it. Still burries the 6k tach and 120 MPH GPS speedo.
Adding throttle very slowly to preserve the drive.
Repositioned the bypass valve hoses and the boost is still under 10 lbs.
Dustin Whipple will trade two of the pulleys for us to get some more boost. Great folks to work with.
Not sure if we should put more boost in it. Runs pretty well as is.
****** VIDEO CLICK HERE ******
Adding throttle very slowly to preserve the drive.
Repositioned the bypass valve hoses and the boost is still under 10 lbs.
Dustin Whipple will trade two of the pulleys for us to get some more boost. Great folks to work with.
Not sure if we should put more boost in it. Runs pretty well as is.
****** VIDEO CLICK HERE ******
#5
Registered
Thread Starter
Join Date: Jan 2003
Location: Broken Arrow, OK
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by BAD-HABIT
Just wondering...What is this beast in? Where was this shot at? And last thing N I C E R I D E
BH
Just wondering...What is this beast in? Where was this shot at? And last thing N I C E R I D E
BH
Boat built in Oklahoma, Engine built in Oklahoma, tested on Ft. Gibson lake Oklahoma.