question for Bobby Daniels- HD coupler?
#1
Registered
Thread Starter
Join Date: Jan 2002
Location: McHenry, IL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
question for Bobby Daniels- HD coupler?
Is there an HD drive coupler for higher HP applications- 700 HP
I spun mine where the rubber meets the stamped flange that bolts to the flywheel- lots of burning rubber smell. The spines are fine-plenty of grease. I suspect that grease flinging outward may work it's way between the rubber and the metal aggravating the problem. I got off the throttle immediately and was able to idle home.
Thanks,
Mark S.
I spun mine where the rubber meets the stamped flange that bolts to the flywheel- lots of burning rubber smell. The spines are fine-plenty of grease. I suspect that grease flinging outward may work it's way between the rubber and the metal aggravating the problem. I got off the throttle immediately and was able to idle home.
Thanks,
Mark S.
#3
Guest
Posts: n/a
Hey Mark sorry I had to have some test run yesterday so I'm late getting to you
They have a killer coupler that has held for us ,and really does a good job
offshore performance ,Donnie 941-489-0884---should have some if not p'm ,me I'll ship you one at dealer ,sorry for answering late
They have a killer coupler that has held for us ,and really does a good job
offshore performance ,Donnie 941-489-0884---should have some if not p'm ,me I'll ship you one at dealer ,sorry for answering late