29scarab

My oil temp is reading between 230 and 260 at cruise speeds. I think this is a little high. My water temp runs between 125 and 140. It use to be between 110 and 125. I have a Whipple charged 502 mpi. I was going to start by changing the water pump first and then go from there.

I know I don't have a T-stat in with the Whipple on the engine.

I could sure use some suggestions on what to check. The next step is to go with a heavy duty oil cooler or something.

Any help on this would be appreciated.

Thanks,

Shawn

Rodger

Is that temperature being measured in the oil pan?

29scarab

Not sure where sender is.