How much oil should 502's burn?
#12
Registered
I found that the half quart from full to half went very fast. From half to add it took much longer. I did try the 40 wt. Valvoline and it did not burn as much but I am sticking with the 20-50 Mobil 1. I think that operating temp has a lot to do with it.
#13
Team Dysfunctional
Charter Member
Join Date: Jan 2001
Location: Bolton Landing NY
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
I got 20 hours on her this year. I cruse at 3700-4100 and ran one poker run. I havent lost a ounce .........................................Yet
#14
Registered
Join Date: Oct 2000
Location: Knoxville,TN, USA
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
How much oil 502's
To cruise a Formula 400 @ over 40 mph probably takes a reasonably high RPM. My experience has always been that the higher the RPM, the higher the oil use. I cruise at 3500 @ 52 MPH and seldom if ever add oil. I use Mobil One 15-50 and keep it very fresh with 25 hr change intervals.
#15
32' SUNSATION
Platinum Member
Join Date: Feb 2001
Location: MA
Posts: 1,143
Likes: 0
Received 0 Likes
on
0 Posts
I use to burn about a quart every 5-10 hrs or so, But now with ever oil change, I throw in a quart of Vaseline.
Just kidding guys, Don't throw Vaseline in your engine...
Just kidding guys, Don't throw Vaseline in your engine...
#17
Platinum Member
Platinum Member
Originally posted by Hot Boat
I got 20 hours on her this year. I cruse at 3700-4100 and ran one poker run. I havent lost a ounce .........................................Yet
I got 20 hours on her this year. I cruse at 3700-4100 and ran one poker run. I havent lost a ounce .........................................Yet
I ear when you do lose some it's more than an once!
#20
Guest
Posts: n/a
IMOA if you change oil brands or type ((like going to syn.)) sometimetimes the new additive package will cause the motor to use oil a short time then stop ,Syn. is better at lasting as its harder to burn and ron above is right forged piston motors are prone to us alittle oil . J&E piston that come in 502's use a tighter clerance and thats a big reason Merc uses them they really make a good part ( thats why most cup teams run the J&E's is the clearance issue,tight and very tough ))
See Ya
See Ya