alpha question . . again . .
#12
Neno the mind boggler
VIP Member
thanks scott . . let me know (cell# 419-461-1484). was thinking about getting this wraped up by the LEOPA poker run. dont know if im giong to get a batboat or run mine so i wanna be ready just in case. later.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#13
VIP Member
VIP Member
To clarify my statement,
once the l/h rotation lower is installed,
the shift cable will have to be switched
at the quadrant, so the shifters match
direction.
L/h alpha lowers , the rear gear is the
forward gear, which is the reverse
gear in r/h alpha's, thus requiring
different cable action.
jt
once the l/h rotation lower is installed,
the shift cable will have to be switched
at the quadrant, so the shifters match
direction.
L/h alpha lowers , the rear gear is the
forward gear, which is the reverse
gear in r/h alpha's, thus requiring
different cable action.
jt
#14
Neno the mind boggler
VIP Member
thanks jt . . .
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#15
Charter Member #30
Charter Member
Answer your phone
And TTT for anyone else that can help My friend did not have counter rotating drives in stock.
And TTT for anyone else that can help My friend did not have counter rotating drives in stock.
__________________
I have Steps & Bubbles!
I have Steps & Bubbles!
#18
Registered
glassdave,
I switched alpha's to c/r. PM me if you like
I switched alpha's to c/r. PM me if you like
#19
Registered
I have just bought a set of Alpha drives. One is supposed to be a CR unit but is not marked. With the shift tab in the straight position, they both turn in the same direction. I may have gotten screwed. Jt mentioned that the cables must be switched. If so I might have one CR unit. Should I split the upper and lower and start there?
#20
Neno the mind boggler
VIP Member
thanks for all the info guys.
sutphil - i will contact you. i would definetly like to discuss this with someone that has been through it.
scott- i'll get ahold of you or see ya at the poker run.
BahaRunner- you weasel . . start yer own damn thread . . .
sutphil - i will contact you. i would definetly like to discuss this with someone that has been through it.
scott- i'll get ahold of you or see ya at the poker run.
BahaRunner- you weasel . . start yer own damn thread . . .
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )