Need advice on head and cam selection for a Procharged 502 MPI
07-21-2003, 08:45 PM
#1
Registered
Thread Starter
Join Date: May 2001
Location: Buckey, AZ
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Need advice on heads and cam selection for a Procharged 502 MPI
Just popped a head gasket after 120 hours. Figured this would be a good time to upgrade to Aluminum heads and cam. I have a M-1SC 50 lb injectors AZM fuel system. I need advice.
Last edited by Cat-n-Around; 07-22-2003 at 07:55 PM.
