Are these heads any good. Casting # 10114158
#11
Registered
Thread Starter
Join Date: Jun 2003
Location: Amherst Ohio
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
OK Thanks
I'll run ARP Bolts Stock rods and crank.
I'm not planning on a high rpm motor i was thinking max rpm at 5000.
Would I be better off with a set of Merlin heads? or would these be ok reworked.
By the time I upgrade these I'll probably have a grand in them. Would only be 500 or so more for the Merlins.
Thanks Rob
I'll run ARP Bolts Stock rods and crank.
I'm not planning on a high rpm motor i was thinking max rpm at 5000.
Would I be better off with a set of Merlin heads? or would these be ok reworked.
By the time I upgrade these I'll probably have a grand in them. Would only be 500 or so more for the Merlins.
Thanks Rob